Subscribe
Copyright © BNP Media.
All Rights Reserved.
Design, CMS, Hosting & Web Development :: ePublishing.
The installation of thermoplastic single-ply roofing shall comply with the provisions of this section.
Asphalt shingles shall be installed in accordance with Section 1507.2.7. For roofs located where the basic wind speed in accordance with Figure 1609 is 100mph or greater.
Roof coverings installed on low-slope roofs (roof slope <2:12) in accordance with Section 1507 shall resist impact damage based on the results of tests conducted in accordance with ASTM D 3746.
Low-slope membrane roof system metal edge securement, except gutters, shall be designed and installed for wind loads in accordance with Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1, except the basic wind speed shall be determined from Figure 1609.
Section 1503.3 Coping: Parapet walls shall be properly coped with noncombustible, weatherproof materials of a width no less than the thickness of the parapet wall.
ON DEMAND: Register for this webinar and hear from Scott Kriner as he covers the features and benefits of metal roofing and wall systems.
Marshall Gross, author of the popular book, “Roof Framing,” shows how to cut shed, gable, hip, and irregular roofs, with a non-center ridge.
With access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.
Architectural Roofing & Waterproofing webinars are an easy, effective and convenient way to stay on top of the latest industry trends and new technology. Webinars are offered every month, allowing you to earn continuing education credits from the convenience of your own office.
To find out more go to our Webinar page today!
